4.0  ⭐ auf TrustPilot
Schneller Versand in der EU
Über 1000 Kunden vertrauen uns bereits!

4.0 / 5.0 ⭐  auf TrustPilot

Go to homepage

Spare parts for edge banding machines
Pressure rollers | Glue nozzles | Chain plates | Filters and more


Filter products

Messinghülse mit zylindrischer Form
Bearing bush (small pressure roller)
Lagerbuchse für kleine Andruckrolle
UDZ3 | UDZ6

€20.70*
Schwarzer zylindrischer Kunststoff-Clip mit Gewindebolzen und breitem Rand
Bearing pin for mitre shear
Set bestehend aus: 1x Lagerbolzen + 1x Befestigungsschraube + 1x Sicherungsring + 4x Unterlegscheibe

€197.98*
Dunkelgraues zylindrisches Bauteil mit zwei runden Öffnungen oben
Ceramic Sealing Sleeve - coated
Sealing sleeve for the CombiMelt glue application system. It is used to seal the roller so that glue application functions smoothly.

€47.00*
Schwarzes Metallteil mit zwei Befestigungsbohrungen und geriffelter Vorderseite
Chain plate 80x80x40mm
The chain plates fit all edge banding machines made by Ott.Before fitting, warm the chain support plates thoroughly with hot air, otherwise they will break.280 pcs for a Profimatic190 pcs for a Twister155 pcs for a Tornado185 pcs for a Storm

€11.90*
Metallhalterung und Schraube auf weißem Hintergrund
Chip breaker for radius scraper blade
Passend für AZK2/ AZK4

€5.30*
Metallplatte mit einem runden Loch an einem Ende
Chip breaker for surface pull scraper

€5.30*
Kemmbügel von Harting in umgedrehter Anordnung
Clamp bracket connector 6 pole
Clamp bracket for CombiMelt gluing system 6 pole.

€9.30*
Klemmbügel für Industriestecker in schwarz
Clamping bracket 6 pole glue head black
Clamping bracket for glue head 6 pole black

€9.30*
Schwarzer Klemmhebel mit zwei seitlichen Halterungen
Clamping bracket connector 10-pole.
Clamping bracket for the funnel connector (10-pole)

€10.00*
Klemmhebel für das CombiMelt von Ott
Clamping lever for interchangeable head
Replacement clamping lever for a CombiMelt interchangeable head.

€21.80*
Weißer Ring aus Kunststoff mit leicht ovaler Form
CombiMelt Filling Tube Thrust Washer
Thrust washer for CombiMelt filling tubeDimensions:D: 44mmB: 4.25mmH: 6.5mm

€12.10*
Weiße Kunststoff-Zugfederkupplung mit Metallgewinde
Compression spring coupling (AKF top)
Compression spring coupling for the AKF (top)

€88.40*
Dämpfungszylinder AKF Ott
Damping Cylinder AKF
The Damping Cylinder AKF is a jointing tool for edgebanding machines.It is used in the jointing unit to prepare workpiece edges cleanly and accurately before edging.Clean jointing quality for precise edgebanding.Technical dataFeatureValueProduct type:Spare partItem number:GWMZ2480/8Manufacturer:Deutsch Gib einen Produkthersteller ein ... Gib die Lieferzeit an ... Headless Glade CNC-Technik Shop .. / AKF CoverApplicationsEdgebanding machine Jointing unit Edge processingWhen is replacement worthwhile?The workpiece edge becomes rough before edgingThe jointing unit produces tear-out or chatter marksService life or machining quality declinesWhy buy from Glade CNC?Correct assignment - category, tags and technical data are taken into accountFast shipping within the EU - so your production keeps runningExpert advice - we know the applications, not just the item numbersNote: Not sure whether this item is suitable for your application? Call us: 05232 850 749 1Mon-Thu 9 am-5 pm, Fri 9 am-2 pm - we can help you with the correct assignment.

€265.00*
Metallzylinder mit beigefarbener Kunststoffhülse
Drive Shaft Ott 8-Station Magazine
Drive shaft Ott 8-Station magazine

€188.00*
Drei Filtereinsätze mit Zubehör in Folienverpackung
Filter Set Drying Box
Bestehend aus: 1x Filter Schwarz, 1x Filter Gelb, 1x Hülse Weiß, 1x Abdeckkappe

€150.00*
Schwarzer Metallblock und Zubehör in einer transparenten Tüte
Glue Roller Bearing Set
The glue roller bearing set is a high-quality accessory specifically developed for Paul Ott GmbH edge banding machines. It has been designed to support the glue rollers and ensure precise and efficient processing of edging materials.The bearing set consists of robust and durable components that ensure reliable performance over a long period of time. Every detail has been carefully considered to ensure optimum functionality and ease of use.With the glue roller bearing set, you can precisely adjust the condition and alignment of the glue rollers on your edge banding machine. This enables an even distribution of adhesive on the edging material and contributes to a high-quality finish. The precise adjustability of the bearing set ensures that the adhesive is applied evenly and in a controlled manner, resulting in improved bonding and clean edge processing.With the glue roller bearing set for edge banding machines from Paul Ott GmbH, you can optimise the performance of your machine and achieve high-quality results. Invest in this high-quality accessory and experience more efficient and precise processing of your edging materials. Rely on the many years of experience of Paul Ott GmbH and benefit from innovative solutions for woodworking.

€208.40*
Gelbe Laufrolle mit Metalllager und schwarzem Innenring
Guide roller for narrow parts
Guide roller for narrow parts for edge banding machines by Paul Ott.Scope of delivery: Guide roller without bracket

€80.40*
Zylinder für das AKF-Aggregat von Paul Ott
Guide with stop and cylinder
Feed cylinder with stop and cylinder for AKF

€165.60*
Weißer zylindrischer Rollenhalter mit Gewindestiften an beiden Enden
Infeed roller
Größe: 30x104mm

€40.30*
Roter O-Ring auf weißem Hintergrund
O-Ring (Ø 45mm)
Hitzebeständiger O-Ring für das Paul Ott CombiMelt

€18.40*
Gelbes Rad mit Metallhalterung
Ott feeler roller for trimming shear
Passend für Paul Ott Kantenanleimmaschinen

€65.40*
Pneumatikzylinder mit Gewindestange und Schutzkappen
Pneumatic Cylinder Top/Bottom (Longitudinal Movement)
The Pneumatic Cylinder Top/Bottom (Longitudinal Movement) is a suitable replacement or wear part for the reliable operation of your machine.Timely replacement helps reduce downtime and maintain the system's function.Find the right part and get your machine back in service quickly.Technical dataFeatureValueProduct typeSpare partItem numberGP06025160BManufacturer0Applications and compatibilityCNC technology Edge processing WoodworkingWhen is replacement sensible?The existing part is wornThe machine is showing functional problemsReplacement is intended to avoid downtimeWhy buy from Glade CNC?Practically selected items - suitable for workshops, CNC and edge processingFast shipping within the EU - so your machine is not out of service longer than necessaryExpert advice - we know the machines, not just the item numbersNote: Not sure whether this item fits your machine? Call us: 05232 850 749 1Mon-Thu 9-5 pm, Fri 9-2 pm - we will help you find the right part.

€88.00*
Gelbe Laufrolle mit schwarzer Halterung
Pressure roller for narrow parts (bottom)
Pressure roller for machining narrow parts - roller position: bottom

€180.80*
Schwarze Metallhalterung mit gelbem Rad und Befestigungsschraube
Pressure roller for narrow parts (top left)
Pressure roller for machining narrow parts - roller position: left top

€188.20*
A functioning edge banding machine is essential for every joiner and furniture maker. If it comes to a standstill, orders cannot be processed any further and follow-up orders may not be accepted. In addition, individual components can wear, which affects the quality of the end product. To ensure your edge banding machine operates smoothly, we offer a wide selection of spare parts, specially for Ott edge banding machines. In addition, we offer a wide selection of tools .

Spare parts for Ott edge banding machines

As a dealer of Ott edge banding machines, we have been supplying our customers with spare parts, tools and consumables for a long time. With us you will find 

Select spare parts to suit the application

In the spare parts category, you will find replacement and wear parts for edge banding machines and their aggregates. The selection is not based solely on the product designation: what matters is that the tool, spare part or operating material technically suits the existing machine and the planned machining step. The range currently includes 3 assigned items. These include, for example, glue roller bearing set, clamping bracket plug 10-pin, clamping bracket plug 6-pin.

What matters when it comes to spare parts?

Before ordering, check in particular the manufacturer, machine model, assembly, installation position, dimensions and original reference. For replacement and wear parts, the machine designation, year of manufacture, aggregate and existing reference number help to ensure clear assignment. For tools, speed, feed rate, material and correct rotation are also relevant for process reliability and machining quality.

Select professionally and avoid downtime

A suitable version supports clean results, repeatable processes and economical service life. Therefore, compare the technical data of the item with your machine and the existing component. If the assignment within edge banding technology is not clear, send us the machine or part details. The Glade CNC-Technik team will support you in selecting a suitable solution for your specific application.